3-kammer puder med dunfyld

AllerGuard.UK
14 Goswell Road
London
United Kingdom

CVR: 29699784
Tel.: +44 7939 690412
E-mail: info@allerguard.co.uk
WEB: www.allerguard.co.uk

3-CHAMBER PILLOW WITH DOWN FILLING

Back to the front page

Color Off-White

Weaving Microfiber.
Filling: White Polish Goose Down
Material 75% polyester/25% nylon
Closure Sewing

Type and size in cm

Todler 40x60 cm
Standard 50x75 cm

King 50x90 cm

Filling level

Light
Semi-firm
Firm

Product safety

AllerGuard products are classified as Medical Devices by the Danish Medicines Agency and EURAMED.

Washing instructions

AllerGuard withstands washing up to 60 °C.
Also avoid filling the washing machine completely. Max. 80%. This way you give the bedding optimal conditions to be washed thoroughly and hygienically clean.
All our pillows can be tumble dried. (select 600-800 rpm to reduce creasing)
We recommend air drying.
When tumble drying, we recommend that you select "iron dry" and let the cover air dry to remove any remaining moisture. This will reduce wrinkling and shrinkage.
Dry the pillow thoroughly: Tumble dry the pillow on low heat. Use dryer balls or tennis balls to prevent the filling from clumping.
Make sure the pillow is completely dry to avoid mold and bad odors. Repeat the drying process if necessary.
The warranty is void if you use optical brighteners, bleach or fabric softeners.
If necessary, use stain remover before washing.
Use the right detergent: Use a detergent that is suitable for delicate materials, such as down or silk.

AllerGuard® allergen-protective covers are made of microfiber fabric that prevents dust particles as small as 0.5 microns (μ) from penetrating the cover. This significantly reduces contact with house dust mite allergens, which are on average 1-3 microns and are often found in mattresses, duvets and pillows.
At the same time, the surface structure and air and water vapor permeability of the AllerGuard® fabric ensure that the health aspects and hygiene are not reduced.

APPLICATION

Used in cases of confirmed or suspected house dust mite allergy, which leads to symptoms such as difficulty breathing, runny nose, eczema; or if a general improvement of the indoor climate in the bedroom is simply desired by reducing the dust load in the air.
Seek advice from your doctor or AllerGuard if you are in doubt.

USE, PRECAUTIONS AND MAINTENANCE

The performance of the allergen-protective cover depends to a large extent on the ability to retain (dust) particles, and the covers should not be too tight, as this increases the pressure load which could theoretically push allergen particles through the fabric, stitching or zipper.

Avoid sharp objects or other objects that could damage the surface, seams or zippers.
Never place the pillow near strong heat sources (90°C or hotter) or in UV rays (sunlight) for too long periods at a time, as this can shorten the life of the cover.
The AllerGuard® pillow does not require any special maintenance to maintain the allergen-protective function, but is washable in a normal household machine at 40-60°C for general hygiene.
The cover's microfiber means that it air-drys quickly after washing. For even faster drying, you can use a tumble dryer set to low to medium heat.
If you are very allergic to dust/house dust mites, it is recommended to use a dust mask when removing and installing the pillow to avoid contact with dust particles that can be stirred up from the mattress.
Renew your pillow when and if critical defects, such as holes or visible wear, occur due to accidents or improper use. Such defects will reduce protection against allergens.
It is recommended to use AllerGuard® pillows on both mattresses and all duvets and pillows, as otherwise the overall effect may be impaired.

SIDE EFFECTS

There are no health risks or other side effects associated with the use of AllerGuard® allergen-protective covers, as they comply with the standards for normal bedding comfort.

GUARANTEE

AllerGuard® allergen-protective covers are covered by the manufacturer's warranty against material and manufacturing defects. The manufacturer provides a 10-year warranty on all products.

AllerGuard® guarantees that the product in its unopened state is free of allergens, as it is packaged in an allergen-free environment. Therefore, the product will not be returned without further agreement.

Our pillows use AllerGuard fabric as a pillowcase.

We use the high density of the fabric twice. It is a barrier against allergens and dust mites that do not enter the duvet, but it also stops 100% of the down used as filling.

With the AllerGuard pillow there is no need for an extra allergen-proof pillow cover.

Thanks to AllerGuard, microparticles from down that can cause allergic reactions in allergic people are retained inside the duvet/pillow, and you can benefit from the unique properties of natural 100% goose down.

Durability is another extremely important feature of AllerGuard products as they should serve us for a very long time.
We recommend replacing pillow every 4-5 years for hygiene reasons.

But often the products are still in very good condition after this time. To make this happen, you should not lie on the pillow, and it should be aired often and washed regularly. Pillows should also be washed and shaken regularly every morning.

The products' long lifespan and high comfort of use are due to the very high quality of down that we use, in combination with the extremely strong and durable AllerGuard fabric.

AllerGuard down is new, Polish 100%, class I goose down that has undergone additional cleaning processes. It is a unique raw material with many advantages and no disadvantages.